• Weigh the amount of Enchanted Lites Soy Votive candle wax needed for your project.
• Consult our Molds for Votive Candles page to see how much wax each of our votive molds will hold.

• Heat the candle wax to between 190°F and 200°F using a double-boiler system.
• Use a candle thermometer to check temperature.
• Do not heat wax over 200°F, Vegetable waxes are subject to thermal degradation and yellowing.
• Note: Melt point = 137°F Flashpoint = 500°F

• When temperature reaches 160°F-175°F add up to 10% fragrance by melted wax weight not to exceed 1 1/2 ounce of scent to 1 pound of wax.

• Add dye until desired color is achieved.
• You can test color by dropping a few drops of wax onto a piece of white paper.

• Stir thoroughly to incorporate scent and dye.

• Pour Wax that is between 165° F-170° F into clean molds, the lower the temperature the less it will shrink.

• Allow to cool as slowly as possible.
• Do not place in a water bath or refrigerator to accelerate the cooling process.

Never melt wax on a gas stove, it has a Flash Point & is Flammable.
Never leave wax unattended.

Note:  Carolina Candle Supplies shall not be held responsible for products created by you from our supplies.  You alone are responsible for product.